Six Steps to Winterize Anhydrous Applicators
Something went wrong. Please try again later...
Before Old Man Winter officially hits, remember: It’s time to winterize your anhydrous ammonia application equipment.
Applying anhydrous ammonia in the fall is a great step to take if weather and time allow for it. This will save you and your customers time next spring so you can plant as soon as possible and will pave the way for maximum yield potential.
However, once the applications are complete, it’s necessary to take care of the equipment you used. By preparing your (or your customer’s) applicator to sit over the winter months, you’ll ensure it’s ready to use the next time it’s needed.
Why Winterize?
Winterizing anhydrous ammonia applicator equipment is incredibly important. Not only is the cold weather hard on machinery but it also is hard on the fertilizer itself. Anhydrous ammonia can be corrosive. Luckily, there are a few steps you can take each fall to keep your applicator in good working condition for years to come.
How to Winterize
- The first step is to flush the system with clean water. This will get rid of any excess product that might be remaining and prevent corrosion and/or crystallization throughout the winter. If you don’t do this, you could face plugs in various parts of the equipment and possibly cracked pumps in spring.
- Then you also should flush the check valves and drain and replace end caps.
- After that, remove the strainer and drain it as well.
- Be sure to drain the lines and tanks entirely. Proper drainage will help avoid freezing damage when the temperatures drop.
- The next step is to run RV antifreeze throughout the system and leave it in there until spring. Doing this will protect the parts, again, from any damage caused by freezing temperatures.
- Finally, a step some might not think to take is to rinse the entire applicator with clean water. This will ensure there is no corrosive fertilizer left on the outside.
Old Man Winter can be hard on equipment. Make sure to stay one step ahead of him.
For more information to help your customers with nitrogen applications and nutrient management, visit NitrogenMaximizers.com on Corteva.us.
Recent Articles
- 3 Tough Early Emerging Weeds to Be
- Boost Weed Control With Resicore® REV Herbicide
- Employ Resistance Management Practices
- Indiana Farming Family Has No Tolerance for Weeds
- Help Customers Strengthen Herbicide Plans This Year
- 3 New Soybean Herbicides: What You Need to Know
- There’s A Better Way to Control Challenging Weeds